红外与可见光图像融合的小型实时DSP平台实现

综合利用并实时处理红外与可见光图像的互补优势信息,设计实现了一种新型的以TMS320DM642——适合视频和图像处理的高性能定点DSP为核心的嵌入式硬件平台,可编程验证多种双波段图像融合算法。叙述了系统的结构设计和工作流程,板卡各关键组成单元的功能、原理,功耗计算,高频电路设计。介绍了系统的软件流程,包括初始化程序、驱动程序和融合应用程序的实现方法。结果表明,此高速、小型、低功耗的硬件平台可应用于便携式独立工作的双波段图像融合装置中。     

Fabrication of Pre-tilted Vertical Alignment Layers for High-Speed Liquid Crystal Display Using Bi-functional Photoreactive Monomers

Abstract

To enable recent 3D and moving picture applications, liquid crystal displays (LCD) must exhibit fast response and wide viewing angle characteristics. Pre-tilted vertical alignment layers for high-speed LCD were fabricated using bi-functional photoreactive monomers. The monomers can be confined to the polyimide layer and photo-polymerized by UV exposure under voltage. Response characteristics of photo-controlled alignment films according to the structure were investigated. Vertical alignment properties were evaluated using a polarizing optical microscope, and electro-optical characteristics were compared through the voltage-transmittance curve and response time measurement. Faster response speed could be obtained by using photoreactive monomers having a long alkyl chain.     

Development of a general separation strategy by countercurrent chromatography using sanshools from Zanthoxylum bungeanum oleoresin as a case study

Three kinds of sanshools were separated from Zanthoxylum bungeanum oleoresin by high-speed countercurrent chromatography. Sanshools are a series of amide compounds extracted from the Zanthoxylum bungeanum. Due to similar structures, polarities, and dissociation constants, it was challenging to select an appropriate solvent system for their complete separation by countercurrent chromatography. To address this challenge, a solvent-system-selection strategy was proposed to identify a relatively suitable solvent system. Additionally, a separation procedure incorporating multi-elution modes selection was established to separate similar compounds in a logical order. Ultimately, a solvent system comprising n-hexane:ethyl acetate:methanol:water in a ratio of 19:1:1:5.67 was selected. Three amide compounds with high purity were obtained through the use of recycling elution mode to improve separation resolution: hydroxy-ε-sanshool (8.4 mg; purity: 90.64%), hydroxy-α-sanshool (326.4 mg; purity: 98.96%), and hydroxy-β-sanshool (71.8 mg; purity: 98.26%) were obtained from 600 mg sanshool crude extract. The summarized solvent-system-selection strategy and separation procedure incorporating multi-elution modes may instruct countercurrent chromatography users, particularly novices, seeking to separate compounds with highly similar chemical properties.     

An efficient high-speed counter-current chromatography method for the preparative separation of sesquiterpenoids from the rhizomes of Cyperus rotundus L. combined with evaluation of the anti-inflammation activity in vitro and molecular docking

Cyperus rotundus L. has been extensively used in ancient medication for the treatment of different disorders worldwide, in which sesquiterpenes are the most representative components. In this study, sesquiterpenes were effectively purified by two-dimensional counter-current chromatography in combination with continuous injection and inner-recycling mode with a solvent system of n-hexane/ethyl acetate/methanol/water (1:0.2:1:0.2, v/v/v/v). For one-dimension separation, continuous injection mode was used with three times injection and the inner-recycling mode was adopted for the separation of two mixtures for two-dimensional separation. Finally, four sesquiterpenoids, including scariodione ( 1 ), cyperenoic acid ( 2 ), scariodione ( 3 ), and α-cyperone ( 4 ), were obtained with purities over 98%. Mass spectrometry and nuclear magnetic resonance were applied to identify their structures. The results from the anti-inflammation effect with zebrafish demonstrated that cyperenoic acid exhibited stronger anti-inflammation activity. Molecular docking results suggested that cyperenoic acid possessed lower binding energies –9.4545 kcal/mol with 1CX2 to form formed hydrogen bond interaction with ARG120. In general, all the obtained findings proved that the strong anti-inflammation capacity of cyperenoic acid can have the potential of being adopted for treating diseases resulting from inflammation.     

Biphasic alcoholysis coupled with high-speed countercurrent chromatography for high performance on separating phorbol from Croton tiglium Linn extracts

Phorbol is a tetracyclic diterpenoid found in Euphorbia tirucalli, Croton tiglium, and Rehmannia glutinosa, and is nuclear of various phorbol esters. The rapid obtaining of phorbol with high purity highly contributes to its application, such as synthesizing phorbol esters with designable side chains and particular therapeutic efficacy. This study introduced a biphasic alcoholysis method for obtaining phorbol from croton oil by using polarity imparity organic solvents in both phases and established a high-speed countercurrent chromatography method for simultaneous separation and purification of phorbol. The optimized operation conditions of biphasic alcoholysis were a reaction time of 91 min, a temperature of 14°C, and a croton oil-methanol ratio of 1:30 (g:ml). The phorbol during the biphasic alcoholysis was 3.2-fold higher in content than that obtained in conventional monophasic alcoholysis. The optimized high-speed countercurrent chromatography method was using the ethyl acetate/n-butyl alcohol/water at 4.7:0.3:5 (v:v:v) with Na₂SO₄ at 0.36 g/10 ml as the solvent system, using the mobile phase flow rate of 2 ml/min, the revolution of 800 r/min, under which the retention of the stationary phase was achieved at 72.83%. The crystallized phorbol following high-speed countercurrent chromatography was obtained as high purity of 94%.     

高速运动裂纹扩展和分叉现象的近场动力学数值模拟

首先介绍了近场动力学的基本理论,然后以两个实例分析了高速运动裂纹的扩展及分叉现象.分析了近场动力学参数(邻域半径、相邻节点距)及外部参数(材料的弹性模量、密度、温度改变量)等对裂纹分叉的速度和角度的影响并进行了对比分析,数值结果表明:随着邻域半径的增大,裂纹传播速度逐渐减少而裂纹分叉角度逐渐增加;随着相邻节点间距的增加,裂纹的传播速度逐渐减少而裂纹分叉角度也逐渐减少;裂纹分叉长度偏向于弹性模量小和密度大的材料;裂纹传播速度随着弹性模量差值的增大而增大,随着密度差值的减小而增大,同时随着外界温度改变量的增大而减少.近场动力学能自发地模拟裂纹扩展和分叉,不需要借助任何外部准则,不需要预先设置裂纹扩展路径,因此它具有天然的优势.     

红外图像高速实时存储系统设计

针对红外图像具有分辨率低、帧频高的特点,以及目标特性分析和图像处理算法验证需要完整、无损记录图像数据的要求,提出了一种高速数字图像传输记录系统方案。方案采用HOTLinkⅡ＋FPGA＋PCI的体系结构,数据通过同轴线从红外图像设备传输到图像记录设备的CYP15G0101芯片,实现了远距离的点到点可靠传输和解码。FPGA和PCI接口芯片对图像数据进行接收和缓冲,工控机软件通过调用PCI SDK提供的API函数实现对PCI接口芯片的初始化、控制和数据传输等操作,从而将图像数据按照预定的格式连续地写入物理上连续的硬盘存储空间,最终实现数据记录、回放和分析等功能。该方案已经成功应用于某型红外图像记录设备并经过长时间测试,记录时间、漏记率等指标和回放等功能均满足研制要求。     

内埋武器高速风洞弹射投放模型试验关键技术研究

针对新一代战斗机超声速内埋武器弹射投放分离安全性问题,采用高速风洞投放实验技术研究内埋武器从开式武器舱弹射投放分离动态运动过程,风洞投放模型试验过程中采用除垂直加速度不足外,其余全部运动严格相似的轻模型相似设计方法,并针对轻模型法垂直加速度不足所导致的投放垂直位移偏离实物位移问题,采用一种简单易行的公式修正法进行补偿,试验给出了不同初始弹射投放分离条件下,内埋武器从载机投放分离后运动轨迹与姿态角随分离时间的变化规律,试验马赫数$Ma = 1.5$.研究结果表明:初始投放分离角速度对内埋武器投放分离后的运动轨迹及姿态角有较大的影响,当初始投放分离角速度$\omega _{z0}^s = 0^\circ/{\rm s}$时,内埋导弹出舱后先向下运动远离载机的流场干扰区,之后逐渐向载机方向抬升靠近并最终碰撞载机,高速风洞投放试验结果是不安全的,但经过公式修正后投放试验结果比较乐观,垂直方向运动仍然一直下降远离载机,这说明采用高速风洞投放试验得出的导弹不安全投放分离对真实载机来说不一定会出现,高速风洞投放试验结果比较保守. 当初始投放分离角速度$\omega _{z0}^s= 15^\circ/{\rm s}$和$\omega _{z0}^s = 30^\circ/{\rm s}$时,内埋导弹投放分离后运动趋势几乎一致, 均没出现向载机靠近的现象,内埋导弹具有一定的初始投放分离角速度有利于内埋武器的安全分离.      

高速铁路碎石道砟振动的离散元模拟

道砟振动对其磨损、破碎和道床累积变形有显著影响,为揭示高速车辆移动荷载作用下道砟动态响应特性,建立有砟道床离散元模型,开展车辆-轨道耦合动力学计算得到离散元模型输入荷载,模拟分析高速车辆以不同速度通过时有砟道床的振动响应,并与车辆-轨道耦合动力学计算结果进行对比分析。结果表明,轨枕、道砟和道床块振动位移波形相似,位移幅值沿道床深度方向减小,道床块振动位移与轨枕底面以下0.3m处道砟的振动位移相当;轨枕、道床块振动速度与加速度随行车速度提高而增大;受道砟颗粒间复杂相互作用的影响,道砟振动加速度会出现突变。道床离散元模型能合理反映道砟颗粒的振动响应特性,道床块模型体现了道床层在有砟轨道结构中的动力传递与减振特性,两种道床模型的计算结果具有一定的相似性。     

Study on local topology model of low/high streak structures in wall-bounded turbulence by tomographic time-resolved particle image velocimetry

The relationship between the bursting event and the low/high-speed streak in the logarithmic law (log-law) region of a turbulent boundary layer is investigated. A tomographic time-resolved particle image velocimetry (TRPIV) system is used to measure the instantaneous three-dimensional-three-component (3D-3C) velocity field. The momentum thickness based Reynolds number is about 2 460. The topological information in the log-law region is obtained experimentally. It is found that the existence of the quadrupole topological structure implies a three-pair hairpin-like vortex packet, which is in connection with the low/high-speed streak. An idealized 3D topological model is then proposed to characterize the observed hairpin vortex packet and low/high-speed streak.